Item # 607, 0.2756 Inch (in) Bore Diameter (d) Open Metric Ball Bearing On SPB USA

U.S.A.
SPB USA — 2257 Sarasota Center Blvd. Sarasota, FL 34240
Ph: 941.371.1655 Fx 941.371.1669 Email Us

JAPAN
Sapporo Precision, Inc. - Sapporo, Hokkaido
Kitanihon Seiki Co., Ltd. - Ashibetsu, Hokkaido

Print Back

All bearings are available in 52100 Chrome Steel or 440 Stainless Steel.
TTS is used smaller ball, load rating is lower than standard.

Unit of Measure

Specifications | Ball Complement | Notes

Specifications

Bearing Type	N/A Metric Bearing
Bore Diameter (d)	N/A 7.0 mm0.2756 in
Outer Diameter (D)	N/A 19.0 mm0.7480 in
Flange Diameter (D_f)	N/A 22.0 mm0.8661 in
Min. Radius (r_s)	N/A 0.30 mm0.0118 in
Width (B)	N/A 6.0 mm0.2362 in
Flange Width (B_f)	N/A 1.50 mm0.0591 in
Seal	N/A 2RS 2RU
Width (B₁)	N/A 6.0 mm0.2362 in
Flange Width (B_f1)	N/A 1.5 mm0.0591 in
Load Rating (Cr)	N/A 2340 N
Load Rating (Cor)	N/A 889 N
Max. Speed (Grease) x 1000¹	N/A 38 rpm
Max. Speed (Oil) x 1000²	N/A 45 rpm
Cage Type	N/A One-piece nylon crown type (TW) Two-pieces steel ribbon type (J)
Weight	N/A 6.76 grams
Material	N/A 440 Stainless Steel 52100 Chrome Steel

Ball Complement

Qty Z	N/A 6 pcs
Size (Dw)	N/A 3.500 mm0.138 in

Notes

Notes

N/A Open type bearings have shield/seal grooves.

¹ Applicable only for open, single Z, ZZ, single RU and 2RU types in inner ring rotating conditions. Max. speeds for the contact rubber seal(s) types will be around 50-60 % of above values.
² Applicable only for open, single Z, ZZ, single RU and 2RU types in inner ring rotating conditions. Max. speeds for the contact rubber seal(s) types will be around 50-60 % of above values.